Tips to Enhance Car AC’s Performance While Driving
During the long drive on the deserted roads of
Australia during the scorching summer season, your car’s AC system will be the
best friend. To keep it running like new and perform exceptionally throughout
the ride, it is important that it is used carefully. This means carefully using
in its optimum condition and getting it serviced as per the specifications to
avoid costly car air conditioning repairs Campbelltown. The term optimum usage
means a number of things and we have covered some here in this post.
DON’T PRECOOL
According to the experts of fuel injection repairsCampbelltown, faster the engine runs cooler would be the AC. Therefore, you
should avoid switching the AC on as soon as the ignition is turned on because
this pulls power from the engine. This is given the name of pre-cooling and
this is something to avoid totally. It’s recommended that as soon as you start
driving, leave all the windows open with the fan running on the topmost speed.
This is done to evacuate all the warm air and fill the cabin with the fresh air
and then run the AC after 20 seconds.
GO LOW
Experts offering fuel injection services NSW say
that rather than using the AC to its topmost cooling capacity, you should try
and keep tit to the lowest or at medium. This will not put too much pressure on
the engine as well as the compressor and also make the AC perform optimally. If
you set the temperature higher, you're actually forcing the system to reheat
the cooled air, which takes more effort and more fuel.
DON'T RECIRCULATE
People often think that recirculating the AC air
is a good move, but this should be avoided completely where there are
passengers on the back seat. Recirculating will not allow the rear air or the
rear part of the entire cabin to cool down and the passengers at the back seat
will have to stay in the hot and stale air.
Learn More
Very informative blog about Car Maintenance. To know more about Car Repair and Services, check out Shree Kanishkaa Motors
ReplyDelete